AGFA CR Series Service Manual page 73

DD+DIS155.11E
NOTE:
In a system with just one digitizer and one NX the Recovery Exposure Type is not
relevant. For more information refer to the Application Note "Functional Changes in
NX 2.0.8500 / 3.0.8500 and NX 2.0.8600 / 3.0.8600", Document ID 32972652.
(62) In the same window select <New>
to add a new digitizer.
(63) Enter following data in the "Add
Digitizer" window.
- Name: DIG_DEFAULT
- Type: CR 10-X* or CR 12-X**
* Use CR 10-X, for subtype 100 or CR Reader, subtype 110
** Use CR 12-X for subtype 200 or CR Advanced Reader, subtype 210
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 51
Agfa Company Confidential
Figure 52
Chapter 1 / Page 37 of 47