AGFA CR Series Service Manual page 68

DD+DIS155.11E
(38) If the installation wizard pops up:
Select <cancel>
(39) Select service menu: <Error
Viewer Installation>.
(40) Click:
<ErrorViewerInstaller.msi>
(41) Click <run> to start the
installation.
(42) Follow the further instructions to
install the Error Viewer.
(43) Copy the application license file
(ALF) to the NX workstation
(e.g. directory
C:\AGFA\Healthcare\NX\
Configuration\Licensing).
(44) Double-click the Licensing
Manager icon on the desktop.
(45) Select Add License and browse
to the folder where the ALF file is
stored.
(46) Wait a few seconds until the
message appears: The licenses
have been updated.
(47) Close the License Manager.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 38
Figure 39
Figure 40
Chapter 1 / Page 32 of 47
Agfa Company Confidential