Table of Contents
Advertisement
NovaScale R620 User Guide
DAILY MAINTENANCE
To use your NovaScale/ft Server series in best condition, check and maintain regularly as described below. If an error is
found on your NovaScale/ft Server series, consult your sales agent.
Checking Alert
Monitor the failure occurrence by ESMPRO during the system operation.
Always check whether any alert is reported to ESMPRO Manager on the management PC. Check whether any alert is
reported on the Operation Window, Data Viewer, or Alert Viewer of ESMPRO Manager.
Viewers of ESMPRO
Operation Window
Alert Viewer
Data Viewer
Checking STATUS LEDs
Check the LED indication on the front of the NovaScale/ft Server series, on hard disks installed in 3.5-inch hard disk
drive bay, or on LCD display when the server is powered on or powered off by the shut down operation. The functions
and indications of LEDs are described in Chapter 2. If there is any indication that shows an error, contact your sales
agent.
Making Backup Copies
We recommend you make backup copies of your valuable data stored in hard disks of the server on a regular basis. For
backup storage devices suitable for the server and backup tools, consult with your sales agent.
When you have changed the hardware configuration or BIOS configuration, select "System Information Management"
and then "Save" of the Off-line Maintenance Utility to make a backup copy of the system information.
Cleaning
Clean the server on a regular basis to keep the server in a good shape.
6-2
Advertisement
Table of Contents
Troubleshooting
