DAILY MAINTENANCE
To use your Fault Tolerant Server series in best condition, check and maintain regularly as described below. If an error
is found on your Fault Tolerant Server series, consult your sales agent.
Checking Alert
Monitor the failure occurrence by NEC ESMPRO during the system operation.
Always check whether any alert is reported to NEC ESMPRO Manager on the management PC. Check whether any
alert is reported on the Operation Window, Data Viewer, or Alert Viewer of NEC ESMPRO Manager.
Viewers of NEC ESMPRO
Operation Window
Alert Viewer
Data Viewer
Checking STATUS LEDs
Check the LED indication on the front of the Fault Tolerant Server series, on hard disks installed in 3.5-inch hard disk
drive bay, or on LCD display when the server is powered on or powered off by the shut down operation. The functions
and indications of LEDs are described in Chapter 2. If any indication that shows an error, contact your sales agent.
6-2