Attach Rock Wall Assembly To Fort - KidKraft CASTLEWOOD Installation And Operating Instructions Manual

Step 15: Attach Rock Wall Assembly to Fort
Part 1
A: Place Rock Wall Assembly centred in opening of the Back Wall as shown in the Fort Guide and flush as shown
below. Attach (2776) Rock Rails to the Back Wall using 4 (S11) Wood Screws. (fig. 15.1 and 15.2)
B: Attach 1 (2779) Access Board to top of Rock Wall Assembly, flush to top of (2776) Rock Rails using 4 (S20)
Wood Screws. (fig. 15.3)
Note: Make sure (2776) Rock Rails do not cover the bolt head, move assembly over so it is tight to the bolt
head. (fig. 15.1 and 15.2)
S11
2776
Wood Parts
1 x Access Board
2779
Fig. 15.1
S11
Fig. 15.3
2779
S20
2776
S20
Panel
Flush
Flush
Hardware
4 x Wood Screw
S20
4 x Wood Screw
S11
44
Fig. 15.2
Bolt
Head
2776
2776
S11