Attach Steel Hand Grips And Handrail To Fort - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 16: Attach Steel Hand Grips and Handrail to Fort
Part 1
A: On the (083) Back Wall Panel, measure 5-1/2" up from the (025) RW-AL Support in the 2 locations shown in
fig. 16.1. Place the Steel Hand Grips in position and mark the hole locations on the panel. Pre-drill with a 1/8" drill
bit making sure the holes are centered then attach each Steel Hand Grip using 2 (WL3) 1/4 x 1-3/8" Wafer Lags
(with flat washer). (fig. 16.1 and 16.2)
Steel Hand Grip
083
5-1/2"
025
Fig. 16.1
Hardware
4 x 1/4 x 1-3/8" Wafer Lag
WL3
(1/4" flat washer)
42
5-1/2"
Fig. 16.2
1/4" Flat Washer
WL3
Steel
Hand
Grip
WL3
1/4" Flat Washer
083
Other Parts
2 x Steel Hand Grip