Attach Hand Grips To Fort - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 25: Attach Hand Grips to Fort
Pre-drill all holes using a 3/16" drill bit before installing the Lag Screws
A: Measure 6" up from the floor boards on both (2181) Short Post and (2180) Post then attach 1 Hand Grip per
post with 2 (LS1) 1/4 x 1-1/2" Lag Screws (with flat washer) per Hand Grip. (fig. 25.1)
Fig. 25.1
Hand Grip
2180
1/4" flat
washer
6"
1/4" flat
washer
LS1
LS1
4 x
Back Wall
Hardware
1/4 x 1-1/2" Lag Screw (1/4" flat washer)
LS1
66
Hand Grip
1/4" flat
2181
washer
LS1
1/4" flat
washer
Other Parts
2 x Hand Grips