Table of Contents
Advertisement
LBC-4000 L-Band Up/Down Converter System
MN/LBC4000.IOM
Ethernet Interface Operation
Revision 5
Current Active Firmware Image
This read-only section identifies the selected Current Active Firmware Image. In
this example, Image 2 is the Current Active Firmware Image.
Next Reboot Image
Use the drop-down menu to select Image 1 or 2. Press [Submit] when done.
Click [Reboot Now] to reboot the LBC-4000 using the Current Active Firmware
Image.
Fault Relay Logic
Use the drop-down menu to select the Fault Relay Logic as Normal or Invert, and
then click [Submit].
Perform Soft Reboot
Click [Reboot Now] to reboot the unit using the Current Active Firmware Image.
Firmware Information
This read-only scrollable window identifies the Bootrom, Bulk Image#1 and Bulk
Image #2 firmware information.
7–21
Advertisement
Table of Contents
