Utility:) Aid (Application Identification String) Submenu - Comtech EF Data MN/LBC4000.IOM Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Front Panel Operation
If the image that you select is already set as the designated Next Reboot Image,
this message displays:
You may repeat the task by instead selecting the alternate image.

6.2.6.4 (UTILITY:) AID (Application Identification String) Submenu

The Application Identification (AID) submenu allows you to create a customized
message. The AID may serve to identify the satellite, either transponder, beam,
destination or other aspects of the application that may be significant to
operations. The default AID is "AID MESSAGE".
On the bottom line: At the "Edit AID Message?" prompt, use the [][] arrow
keys to select No or Yes. Press [ENT].
Typical for the top and bottom lines of the message, use the [][] arrow keys
to select a character, and then use the [][] arrow keys to change that
character. A maximum of 24 characters are available on each line – 48 characters
in all. Permissible characters are: [Space]( )* + - , . / 0-9 and A-Z.
An example of an AID message is as follows:
Press [ENT] once you have composed your message. At the top level splash
screen (which identifies the product in use), you may use the [CLR] key to toggle
between the splash screen and the AID message.
THAT IMAGE IS ALREADY
CURRENT. NO CHANGE MADE.
Edit AID Message?
No Yes
LBC-4000 SERIES
48 CHARS MAX TST MESSAGE
6–21
MN/LBC4000.IOM
Revision 5