Rus (Retrieve Utility Status); Sam (Set Auto/Manual Switching Mode); Sas (Summary Alarm Status) - Comtech EF Data MN/LBC4000.IOM Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Serial Interface Operation

8.3.32 RUS (Retrieve Utility Status)

Legacy Query only. Use "RUS" to return the operating utility features for the
unit.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
N/A RUS_ 98 bytes,
alphanumeric

8.3.33 SAM (Set Auto/Manual Switching Mode)

Command or Query. Use "SAM" to set or return the operating redundancy
switching mode as Automatic or Manual.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
SAM_ SAM_ 1 byte,
alphabetic
Command Example: <0001/SAM_M{cr}

8.3.34 SAS (Summary Alarm Status)

Query only. Use "SAS" to return the status of the Summary Fault Relay.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
N/A SAS_ 2 bytes,
alphabetic
Description of Arguments
Query
Return the detailed utility status for the unit where:
hh:mm:ss=TIME
mm/dd/yy=DATE
xxxx=FSDA (Reserved for future use)
xxxx=FSDB (Reserved for future use)
yyy=BVFD
zzz=SCRT
FW9965X=BULK FW (where X=revision letter)
FW9966X=M&C FW (where X=revision letter)
FW9967X=FPGA FW (where X=revision letter)
Description of Arguments
Query
Set or return in the form SAM_x where:
x=A (Automatic Switching Mode) or M (Manual
Switching Mode)
Description of Arguments
Query
Returns Summary Fault Relay status in the form
SAS_xx where:
xx=OK or FT
8–21
MN/LBC4000.IOM
Revision 5
Target-to-Controller
Response
Command Query
N/A RUS_x...x
Target-to-Controller
Response
Command Query
SAM_ SAM_x
Target-to-Controller
Response
Command Query
N/A SAM_x