Table of Contents
Advertisement
LBC-4000 L-Band Up/Down Converter System
Serial Interface Operation
8.3.5
CAS (Concise Alarm Status)
Query only. Use "CAS" to return the Alarm Status for the unit.
Controller-to-Target
Arguments for
Instruction Code and Qualifier
Command or
Response to
Command
Query
N/A
CAS_
13 bytes,
numeric
8.3.6
CCS (Concise Configuration Status)
Query only. Use "CCS" to return a summarized version of the RCS query.
Controller-to-Target
Arguments for
Instruction Code and Qualifier
Command or
Response to
Command
Query
N/A
CCS_
52 bytes,
numeric
Description of Arguments
Query
Returns alarm status as 0 = NO FAULT or 1 =
FAULT for each item in the form
"CAS_abcdefghijklm{cr}{lf}" where:
a=12VDC #1 Fault
b=8VDC #1 Fault
c=5VDC #1 Fault
d=12VDC #2 Fault
e=8VDC #2 Fault
f=5VDC #2 Fault
g=REF LD Fault
h=IFLO A Fault
i=RFLO A Fault
j=TEMP A Fault
k=IFLO B Fault
l=RFLO B Fault
m=TEMP B Fault
Description of Arguments
Query
Returns status info in the form
"CCS_aaaaa.aaabb.bbcd.defffff.fffgg.gghi.ijklmnnno
pqqqqrs{cr}{lf}" where:
aaaaa.aaa=Conv A frequency in MHz
bb.bb=Conv A attenuation in dB
c=Conv A mute state (0=unmuted, 1=muted)
d.d=Conv A slope adjustment level
e=Conv A online/offline (redundancy)
fffff.fff=Conv B frequency in MHz
gg.gg=Conv B attenuation in dB
h=Conv B mute state (0=unmuted, 1=muted)
i.i=Conv B slope adjustment level
j=Conv B online/offline (redundancy)
k=Converter redundancy mode
l=auto fault recovery (1=auto, 0=manual)
m=External Ref present (0=none, 1=present)
nnn=Internal Ref Osc adjustment level (000-255)
o=remote mode (1=remote, 0=local)
p=remote interface (0=EIA-232, 1=EIA-485)
qqqq=remote address (0001-9999)
r=remote baud rate (0=38400, 1=19200, 2=9600,
3=4800, 4=2400, 5=1200)
s=remote data format (0=8N1, 1=7E2, 2=7O2)
8–10
MN/LBC4000.IOM
Revision 5
Target-to-Controller
Response
Command
Query
N/A
CAS_x...x
Target-to-Controller
Response
Command
Query
N/A
CCS_a...s
Advertisement
Table of Contents
