Frm (Retrieve Firmware Number); Frw (Retrieve Legacy Firmware Number) - Comtech EF Data MN/LBC4000.IOM Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Serial Interface Operation

8.3.14 FRM (Retrieve Firmware Number)

Query only. For use with current (Ethernet-ready) versions of the LBC-4000.
Returns the firmware information for the unit.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
N/A FRM_ 0 bytes

8.3.15 FRW (Retrieve Legacy Firmware Number)

Query only. For use with legacy (non-Ethernet) versions of the LBC-4000. Returns
the firmware information for the unit.
Controller-to-Target Arguments for
Instruction Code and Qualifier Command or
Response to
Command Query
N/A FRM_ 0 bytes
Description of Arguments
Query
Returns the current unit firmware info in the form:
"Boot: {cr}
FW-0020506;X.X.X;mm/dd/yy{cr}
Bulk1: {cr}
FW-0020503; X.X.X;mm/dd/yy{cr}
FW-0020504; X.X.X;mm/dd/yy{cr}
FW-0020505; X.X.X;mm/dd/yy{cr}
Bulk2: {cr}
FW-0020503; X.X.X;mm/dd/yy{cr}
FW-0020504; X.X.X;mm/dd/yy{cr}
FW-0020505; X.X.X;mm/dd/yy{cr}{lf}"
where:
X.X.X is the Firmware Version Number, and
mm/dd/yy is the release date.
Description of Arguments
Query
Returns the legacy unit firmware info in the form:
"BULK=FW/9965X{cr}
M&C=FW/9966X{cr}
FPGA=FW/9967X{cr}{lf}"
where:
'X' denotes the Firmware Revision Letter)
8–14
MN/LBC4000.IOM
Revision 5
Target-to-Controller
Response
Command Query
N/A FRL_x...x
Target-to-Controller
Response
Command Query
N/A FRL_x