Deleting/Modifying An Individual Offset Value - Siemens SINUMERIK 810M Operating And Programming Manual

3 Operating Sequences
3.1.4 Tool offset

3.1.4.2 Deleting/modifying an individual offset value

0
S
or
... ...
3-10
You select the desired tool offset number under which you intend
to delete/modify a offset value with the "Page up/down" keys.
With these keys you position the cursor at the input field to be
deleted/modified.
Using the numerical keys you enter the value "zero" (delete)
or
Using the numerical keys you enter a new value (modification).
With this key you transfer the deletion or modification into the
offset memory.
© Siemens AG 1990 All Rights Reserved
09.91
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)