Contour - Siemens SINUMERIK 810M Operating And Programming Manual

3 Operating Sequences

3.1.11 Contour

3.1.11 Contour
The "CONTOUR" softkey function is an extension of "Program input with operator guiding"
(Section 3.1.10.2).
With "CONTOUR" you can select contour elements. Graphics displays support the program-
ming of specific geometric contour values.
Sequence of operation
As described in 3.1.10.1 or 3.1.10.2 - select any of the operating modes:
•
PRESET
•
JOG
•
AUTOMATIC
•
INC 1 ... INC 10000
•
REFPOINT.
PART
PROGRAM
EDIT
... ...
%
3-48
Now operate the "PART PROGRAM" softkey.
Operate the "EDIT" softkey.
Use the numeric keys to enter the desired
program no. %...
© Siemens AG 1990 All Rights Reserved
11.90
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)