Cycle Lock Release ("Enable") - Siemens SINUMERIK 810M Operating And Programming Manual

11.90

3.1.13.3 Cycle lock release ("ENABLE")

Sequence of operation
PART DIREC-
PROGRAM TORY
...
3
L
• • •
ENABLE
The cycle is entered in the list of (unprotected) subroutines.
Cancellation of a cycle lock for cycles stored on the
The cycles can be protected against unauthorized
output by programming the PLC accordingly.
This effectively protects the machine tool manufacturer's or user's knowhow.
It is then no longer possible for the operator to enable and disable programs!
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810M, GA3 (BN)
SUB-
ROUTINE
Operate the "PART PROGRAM", "DIRECTORY" and
"SUBROUTINE" softkeys, one after the other, in any of
the operating modes:
PRESET / JOG / AUTOMATIC /
INC 1 .... INC 10000 / REFPOINT.
Using the keyboard enter "L" for the subroutine, and
the number of the desired subroutine.
Now operate the "ENABLE" softkey.
EPROM depends on the PLC program.
6ZB5 410-0EQ02
3 Operating Sequences
3.1.13 Program management
3-59