Xm - Non-Floating Individual And Group Alarms, Signals - Siemens TXP-CLC Manual

TXP CLC Course

XM - Non-floating Individual and group alarms, signals

.M01 Feeder fault
.M02 Undervoltage monitor fault
.M03 Running time exceedekd/torque
.M04 Status discrepancy
.M05 Flashing pulse fault
.M06 24V supply voltage fault
.M07 Alarm voltage fault
.M08 Overvoltage protection fault
.M09 Cabinet power supply fault
.M10 Cabinet door open
.M11 Fault alarm annunciation system
.M12 Running time exceeded
.M13 Step fault
.M14 Electronic fault
.M15 Electronic fault (resetable)
.M16 Subgroup control fault
.M17 Subgroup status discrepancy
.M18 Group control fault
.M19 Group status discrepancy
.M20 Measuring circuit fault
.M21 Unit control fault
.M22 Protective logic fault
.M23 Transmitter fault (inverted)
.M24 Aux. drive emergency ON
.M25 Changeover fault
.M26 Analog signal conditioning fault (dynamic)
.M27 Control interface fault (dynamic)
.M28 Binary signal conditioning fault (dynamic)
.M29 Functional group control fault (dynamic)
.M30 Protective logic fault (dynamic)
30 Training Center
30
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.