Example For The Selection Of Further Operating Functions; Menue Display From The Nc Program Or From The Plc; Within The Same Menu - Siemens SINUMERIK 810M Operating And Programming Manual

09.91
2.3.5.2 Example for the selection of further operating functions within
the same menu
The menu on the CRT can display max. 5 functions.
To call further operating functions in the control in the same menu,
you use the ETC key:
Example:
((Foto - Nr. 810M/13 einmontieren))
((Foto - Nr. 810M/14 einmontieren))
2.3.5.3 Menu display from the NC program or from the PLC
The control allows you to display any menu from the system or user area at any time. This is
done either via a new interface (DB 40) in the PLC program or a new softkey function
(SK 56). The machine tool manufacturer defines which menus can be displayed when.
For further details see the relevant User's Guide of the machine tool manufacturer.
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810M, GA3 (BN)
2.3.5 Branching to operating functions within an operating mode
Basic CRT display in
"AUTOMATIC" mode.
First menu of 5 functions.
Operate the ETC key on the
right, below the CRT.
Basic CRT display in
"AUTOMATIC" mode.
Menu extension with 5
functions.
6ZB5 410-0EQ02
2 Operation
2-45