Setting Data : " R Parameters", "Spindle", "Axial", "Angle Of Rotation", "Scale Modification - Siemens SINUMERIK 810M Operating And Programming Manual

09.91
3.1.6 Setting data : " R PARAMETERS", "SPINDLE", "AXIAL", "ANGLE OF ROTAT.", "SCALE MODIFICATION"
3.1.6 Setting data : " R PARAMETERS", "SPINDLE", "AXIAL", "ANGLE
OF ROTATION", "SCALE MODIFICATION"
Using the setting data, you determine certain operating states.
You can input, modify or delete setting data using screen forms.
Setting data "R PARAMETERS"
The 810M control recognises parameters R0 to R 699 and R 700 to R 999.
•
Parameters RO to R699 are channel-specific, i.e. they exist for both channels, "CH1" and
"CH3", separately.
•
Parameters R700 to R999 are jointly valid for all channels (central parameters).
Only certain R parameters are available for the user.
The following overview shows the parameter
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810M, GA3 (BN)
assignments.
6ZB5 410-0EQ02
3 Operating Sequences
3-21