Operation - Siemens SINUMERIK 810M Operating And Programming Manual

2 Operation

2.1.1 SINUMERIK 810M operator interface with integrated machine control panel
"Key assignment" display
• The yellow LED is bright:
When the lower symbols of all the double-function keys on the
Address/numerical keyboard (Section 2.1.1.3) are active:
The lower character of the operated double-function key is shown in
the input line (Section 2.1.1.1).
• The yellow LED is extinguished:
When the upper symbols of all the double-function keys on the
Address/numerical keyboard are active:
The upper character of the operated double-function key is shown in
the input line.
• Both display states:
are automatically switched over by the NC control.
• Using the key
2-6
yellow LED extinguished
yellow LED bright
on the Address/numerical keyboard (see
Section 2.1.1.3) you can also switch over
"manually".
© Siemens AG 1990 All Rights Reserved
09.91
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)