Siemens SINUMERIK 810M Operating And Programming Manual page 99

11.90
– 4 +X +Z
– Y +Y
– Z – X +4
or
Y
Z
4
X
– +
Note:
The selected traverse direction is checked by the control before starting.
If you have operated the incorrect direction key (e.g.
no traverse motion will result as the operation is rejected).
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810M, GA3 (BN)
Operate the direction keys on the integrated machine
control panel ...
or
Select the axis you wish to traverse with the axis
selector switch on the external machine control panel
and then press the direction key. You can now traverse
the individual axes one after the other to the reference
5
point.
With the "Feed Hold" key you can stop the selected
axis before the reference point is reached.
6ZB5 410-0EQ02
3 Operating Sequences
3.1.2 Traverse to reference point
instead of –X ).
+X
3-3