Siemens SINUMERIK 810M Operating And Programming Manual page 19

09.91
TOOL
OFFSET
Keys below the CRT display
"RECALL" key for jump back to a higher-level menu in the text display
By pressing the RECALL key, you change the softkey functions
displayed and return to a higher-level menu.
Softkeys
With the operation of any one of the 5 softkeys (a softkey is defined as a
key that does not have a fixed function), you select the required softkey
functions, shown in the menu directly above the softkey.
"ETC" key for extension of the same menu
By pressing the ETC key, you change the displayed softkey function in
the text display.
Further functions for the same menu are shown.
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810M, GA3 (BN)
2.1.1 SINUMERIK 810M operator interface with integrated machine control panel
SETTING DATA PART
DATA IN-OUT PROGR.
6ZB5 410-0EQ02
2 Operation
DIAG-
NOSIS
2-3