Siemens SINUMERIK 810M Operating And Programming Manual page 203

01.93
You can now modify the following data:
• Tool number T ...
• Tool offset number D
• Spindle speed S ... or S1= ..., S2= ...
• Auxiliary function H ...
• Additional function M ... or M n = ...
... ...
• • •
. .
.
etc.
The program now operates with these new values until a new value in the program
supersedes the overstored function, or until you enter a new value using "OVERSTORE".
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810M, GA3 (BN)
Using the cursor keys, now set the inverse
marking to the desired input field.
Using the keyboard, enter the first correction
value
and store it with the input key.
. .
.
etc.
Press the "Program start" key when all
corrections have been completed.
6ZB5 410-0EQ02
3 Operating Sequences
3.2.3 Influencing "AUTOMATIC" operation
. .
.
etc.
3-103