Siemens SINUMERIK 810M Operating And Programming Manual page 104

3 Operating Sequences
3.1.4 Tool offset
8 L1 Basic
9 L2 Basic
The standard list of identifiers 0 to 9 can be raised to a
Sequence of operation
TOOL
OFFSET
((Bild Nr. 810M/17 einmontieren))
3-8
Identifiers P= "8" and P= "9" are
reserved for special uses.
The "Basic dimension" permits an
additional tool length compensation.
maximum of 16 via MD.
Operate the "Tool offset" softkey.
(It is possible in all operating modes).
This input screen form appears.
The current input field (=the field into
which your input will be transferred) is
displayed in inverse video.
© Siemens AG 1990 All Rights Reserved
09.91
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)