Siemens SINUMERIK 810M Operating And Programming Manual page 125

3 Operating Sequences
3.1.6 Setting data : "R PARAMETERS", "SPINDLE", "AXIAL", "ANGLE OF ROTAT.", "SCALE MODIFICATION"
((Bild 810M/24 einmontieren))
... ...
• • •
DRF
ASSIGNM
((Bild 810M/25 einmontieren))
You can assign each of up to seven axes (for the TRANSMIT function) to a handwheel.
3-28
This input screen form appears
with the input field marked in
inverse video.
Use the cursor keys to position the inverse marking
on the required input field and change the minimum
and maximum working area limitation for the defined
axes (for the fictitious axes of the TRANSMIT
function, too).
Enter the value for the selected input field with the
numeric keys.
Subsequently, you can transfer the value into the
input field with the input key.
Operate the "DRF ASSIGNM" softkey.
This input screen form appears with
the input field marked in
inverse video.
© Siemens AG 1990 All Rights Reserved
09.91
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)