Siemens SINUMERIK 810M Operating And Programming Manual page 102

3 Operating Sequences
3.1.4 Tool offset
1 Tool type
In machine data the machine manufacturer can specify
that tool type 0 have the same effect as tool type 20.
Radius and length compensation are then assigned as
with type 20. The display type 0 remains unchanged.
3-6
The input field marked P= "1" is reserved for the input of "Tool
type P1".
Explanation of tool type:
Tool
1. Tools with length com-
pensation only
Example:
Drill
2. Tools with radius com-
pensation and one length
compensation
Example:
End mill
3. Tools with radius com-
pensation and two length
compensations
Example:
Angular mil-
ling cutter
© Siemens AG 1990 All Rights Reserved
Tool type P1 =. . .
10 (... 19)
20 (... 29)
30 (... 39)
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)
09.91