Create A Sample Template - Waters Alliance e2695 Operator's Manual

Figure 6–17: Linked rows in a sample set
To link rows:
1. Select the row you want to link.
2. Press the More screen key, and then press the Make Link screen key.
Result: The current row is linked with the previous row.
To unlink lines:
1. Select the row you want to unlink.
2. Press the More screen key and then the Break Link screen key.
6.4

Create a sample template

Using a sample template, you define the major parameters of a run and then enter variable
parameters, such as number of vials, vial position, and so forth just before you begin the run.
To create a sample template:
1. Create a sample set as described in
2. On the Main screen, press the Methods screen key.
3. Select the sample set you want to serve as a sample template.
4. Press the Make Tpl screen key.
Tip: To lock the template, use the procedure in
page 93.
"Create and edit a sample set" on page
February 27, 2018, 715003794 Rev. C
Page 117
"Lock and unlock a separation method" on
113.