Waters Alliance e2695 Operator's Manual page 110

Figure 6–13: 486(1) UV/Vis Detector screen
2. Enter detector parameters as required and click OK.
See also: "Edit the detector table" on page 112
The following tables list the parameters for Waters 2487 and 486 detectors.
Table 6–12: 2487 UV/Vis parameters
Parameter
 (wavelength)
Sensitivity
Filter
Polarity
Table 6–13: 486 UV/Vis parameters
Parameter
 (wavelength)
Sensitivity
Filter
Polarity
Function
Sets the wavelength of the
detector.
Sets the sensitivity of the
detector.
Sets the time constant of the
filter in the detector.
Selects the output of the 2487
to create positive or negative
peaks.
Function
Sets the wavelength of the
detector.
Sets the sensitivity of the
detector.
Sets the time constant of the
filter in the detector.
Selects the output of the 486
to create positive or negative
peaks.
February 27, 2018, 715003794 Rev. C
Page 110
for steps on programming detector events.
Value range
190 to 700
in 1 nm increments
0.0001 to 4.0000
in 0.0001 AU increments
0.1 to 99.0
in 0.1 sec increments
+, –
Value range
190 to 600
in 1 nm increments
0.001 to 2.000
in 0.001 AU increments
0.1 to 5.0 in 0.1 sec
increments
+, –