Set Autosampler Parameter Values - Waters Alliance e2695 Operator's Manual

Table 6–5: Sample parameters (continued)
Parameter
Sample Draw Depth
6.2.3

Set autosampler parameter values

To enter parameters in the Autosampler screen:
1. Press the Next or Prev screen key to display the Autosampler screen.
Figure 6–7: Autosampler screen:
2. Enter values in the Autosampler screen as appropriate.
Function
Adjusts the depth of the
needle tip to accommodate for
sedimented samples or
nonstandard vials. A value of 0
corresponds to the bottom of
the vial.
February 27, 2018, 715003794 Rev. C
Page 101
Value range
0 to 20
in 1 mm increments