Waters Alliance e2695 Operator's Manual page 108

To enter parameters in the Detectors screen:
1. Press the Next or Prev screen key to display the Detectors screen.
Figure 6–11: Detectors screen
2. In the Detectors screen, use the up/down arrow keys to select the appropriate detector (for
example, Absorbance Detector 2), and then press Enter to display the detector selections.
3. Use the up/down arrow to highlight your selection, and then press Enter to accept your
selection.
The following table describes the selections in the Detectors screen.
Table 6–11: Detector selections
Parameter
Absorbance Detector (1)
Absorbance Detector (2)
Refractive Index Detector
410
Absorbance (1) (screen key) Displays the 2487 or 486
Absorbance (2) (screen key) Displays the second 2487 or
Function
Enables a Waters 2487 or
486 UV/Vis detector channel
Enables a second Waters
2487 or
486 UV/Vis detector channel
Enables a Waters 2414 RI,
2410 RI, or
410 dRI detector
TUV screen
(see figure "2487(1) UV/Vis
detector screen" on
page 109).
second 486 TUV screen
(see figure "2487(1) UV/Vis
detector screen" on
page 109).
February 27, 2018, 715003794 Rev. C
Page 108
Selections
2487, 486, or Not used
2487, 486, or Not used
410 or Not used
See table "2414 RI, 2410 RI,
and 410 dRI parameters" on
page 111.
See table "2414 RI, 2410 RI,
and 410 dRI parameters" on
page 111.