Typical Connection Diagram - Toshiba VLP Technology Q9 Plus Installation & Operation Manual

Typical Connection Diagram

Figure 20. The Q9 Plus ASD Typical Connection Diagram.
Note: When connecting multiple wires to any of ASD terminals, do not connect a
solid wire and a stranded wire to the same terminal.
Note: The AM, FM, and the +SU analog terminals are referenced to CC.
The RR, RX, P24, and the PP analog terminals are referenced to CCA.
The isolated V/I analog terminal references IICC.
Q9 Plus ASD Installation and Operation Manual
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
25