Table of Contents
Advertisement
Operational and Maintenance
Precautions
•
Turn off and lock-out/tag-out the main power, the control power, and instrumentation connections
before inspecting or servicing the ASD, removing any enclosure panels, or connecting/
disconnecting the power wiring to the equipment.
•
Turn the power on only after attaching (or closing) the front cover. DO NOT remove or open the
front cover or any of the enclosure panels of the ASD during normal ASD operation.
•
During system setup, calibration, testing, or troubleshooting it may be required to access live
circuits. DO NOT leave the system unattended and powered with the door(s) and/or covers
removed.
•
If/when taking a live reading is required (equipment is powered), it is to be performed by
Personnel
personnel for all electrical measurements.
•
The capacitors of the ASD maintain a residual charge for a period of time after the ASD is powered
off. The required time for each ASD typeform is indicated with a cabinet label and a Charge
Indicator LED (shown for smaller ASDs in
of larger ASDs). Wait at least the minimum time indicated on the enclosure-mounted label and
ensure that the Charge Indicator LED has turned off once the ASD power has been turned off
before coming into contact with any circuits.
•
DO NOT attempt to disassemble, modify, or repair the ASD. Contact the TIC Customer Support
Center for repair information.
•
DO NOT place any objects inside of the ASD.
•
If the ASD should emit smoke, or an unusual odor or sound, turn off the power immediately.
•
The heat sink and other components may become extremely hot to the touch. Allow the unit to cool
before coming into contact with these items.
•
The Auto-Restart and Retry programmable functions of the ASD may allow for the system to
start or stop unexpectedly. Warning signs to this effect must be clearly posted at or near the
machinery/hazard.
•
Remove power from the ASD during extended periods of non-use.
•
Inspect the system annually (as a minimum) for damaged or improperly functioning parts,
cleanliness, and to ensure that the connectors are tightened securely. Inspect more frequently when
operating in a harsh environment or when used on a high-output-demand application.
Q9 Plus ASD Installation and Operation Manual
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
WARNING
ONLY. Proper and approved personal protection equipment is to be used by trained
Figure 2 on pg.
15; LED is located on the front panel
Qualified
9
Advertisement
Table of Contents
