Table of Contents
Advertisement
F721
Panel Stop Pattern
Program Special Operation Panel Parameters
While operating in the Hand mode, this parameter determines the method used
to stop the motor when the stop command is issued via the EOI.
The Deceleration Stop selection is used to enable the Dynamic Braking
system that is set up at
F304
at F250, F251, and F252.
The Coast Stop setting allows the motor to stop at the rate allowed by the
inertia of the load.
Settings:
0 — Deceleration Stop
1 — Coast Stop
Note:
The Stop Pattern setting has no effect on the Emergency Off
settings of F603. This parameter may also be accessed by
pressing the ESC key from the Frequency Command screen.
Panel Frequency Lock Out
Program Special Operation Panel Parameters
While operating using the LED Keypad Option, this parameter Enables/
Disables the ability to change the frequency command value.
Settings:
0 — Unlocked
1 — Locked
Panel Cable Breakage Detection
Program Special Operation Panel Parameters
This parameter enables or disables the detection of panel cable disconnection.
Settings:
0 — Disconnection Detection (ERR9 Trip)
1 — No Disconnection Detection (Retain Command)
Panel Emergency Off Lock Out
Program Special Operation Panel Parameters
While operating using the LED Keypad Option, this parameter Enables/
Disables the ability to provide an Emergency Off command.
Settings:
0 — Unlocked
1 — Locked
194
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
or the DC Injection Braking system that is set up
Direct Access Number — F721
Parameter Type — Selection List
Factory Default — Deceleration Stop
Changeable During Run — Yes
Direct Access Number — F730
Parameter Type — Selection List
Factory Default — Unlocked
Changeable During Run — Yes
Direct Access Number — F731
Parameter Type — Selection List
Factory Default — No Disconnection
Detection (Retain Command)
Changeable During Run — Yes
Direct Access Number — F734
Parameter Type — Selection List
Factory Default — Unlocked
Changeable During Run — Yes
Q9 Plus ASD Installation and Operation Manual
F734
Advertisement
Table of Contents
