Toshiba VLP Technology Q9 Plus Installation & Operation Manual page 93

Asd
Table of Contents

Advertisement

F005
FM Terminal Function
Program Terminal Analog Output Terminals
This setting determines the output function of the FM analog output terminal.
The FM output terminal produces an output voltage or current that is
proportional to the magnitude of the function assigned to this terminal (select
current or voltage at F681). The available assignments for this output terminal
are listed in
Table 11 on pg.
Note:
If the monitored item has a positive and a negative component,
use the Expansion I/O Card 2 (P/N ETB004Z). See the
Expansion IO Card Option 2 instruction manual (P/N 58686)
for additional information on the function of the option card.
See
F678
and
F684
for additional information on this parameter.
To read Voltage at this terminal, connect a 100 – 500 resistor from FM (+) to
CC (-). The voltage is read across the 100 – 500 resistor.
To read Current at this terminal, connect a 100 – 500 resistor in series from
FM (+), through the current meter, to CC (-).
FM Terminal Setup Parameters
F005
— Set FM Function
F006
— Calibrate FM Terminal
F681
— Voltage/Current Output Switching Selection
F682
— Output Response Polarity Selection
F683
— Set Zero Level
FM Output Terminal Adjustment
Program Terminal Analog Output Terminals
This parameter is used to calibrate the FM analog output.
To calibrate the FM analog output, connect a meter (current or voltage) as
described at F005.
With the ASD running at a known value (e.g., output frequency), adjust this
parameter until the assigned function produces the desired DC level output at
the FM output terminal.
See
F005
for additional information on this parameter.
84
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
237.
Direct Access Number — F005
Parameter Type — Selection List
Factory Default — Output Frequency
Changeable During Run — Yes
Direct Access Number — F006
Parameter Type — Numerical
Factory Default — 236
Changeable During Run — Yes
Minimum — 1
Maximum — 1280
Q9 Plus ASD Installation and Operation Manual
F006

Advertisement

Table of Contents
loading

Table of Contents