Table of Contents
Advertisement
Figure 35. Run the Motor/Pump in Process Hold Mode.
22. From the Frequency
Command screen, press ESC
and scroll to the Control field.
Select Process Hold if using
feedback (if not using
feedback, go to
74).
23. While in the Hand mode,
press Run.
24. During operation, adjust
parameters
stabilize operation if unstable.
Q9 Plus ASD Installation and Operation Manual
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Step 19. on pg.
F500
and
F501
to
Press ESC
75
Advertisement
Table of Contents
