Mitsubishi Electric Q Series Programming Manual page 83

4 POSITIONING DEDICATED SIGNALS
POINT
(1) Total number of points for the user devices
6632 points
(2) (Note-1) : This device occupies only the areas of the axes set in the mechanical
system program. The unused axis areas in the mechanical system
program can be used as an user side.
(3) This manual describes only details for data registers used in the virtual mode. If it
is required, refer to the "Q173DCPU/Q172DCPU Motion controller (SV13/SV22)
Programming Manual (REAL MODE)".
4 - 52