Download Print this page

Mitsubishi Electric Q Series Programming Manual page 119

Motion controller

Hide thumbs Also See for Q Series:

Table of Contents

5 MECHANICAL SYSTEM PROGRAM

Transmission modules which can be connected at "A" and "B" above

1) A clutch, speed change gear, and "clutch + speed change gear" can be

connected at "A" and "B".

2) If a "clutch + speed change gear" are used, connection constraints

have not restrictions.

Transmission module which can be connected at "C" (pattern 3)

Only a clutch can be connected at "C".

Q173dcpu Q172dcpu