CHAPTER 16 Services
Parameter
'Request Type'
'Request Key'
'Attributes To Get'
'Condition'
'Action Subject'
'Action Type'
'Action Value'
8.
Configure routing rules to route the calls in the network.
9.
(For the SBC application only) Configure IP Groups to represent your call party entities, and
assign them the group of Call Setup Rules (Set ID) that you configured in Step 7 (above). For
configuring IP Groups, see
10.
(For the Gateway application only) Assign the group of Call Setup Rules (Set ID) that you
configured in Step 7 (above) to your Tel-to-IP Routing rules (see
Rules).
Rule 1
LDAP
'mobile=+' + param.call.dst.user
ipPhone
ldap.attr.ipPhone exists
presence.dst
Add
ldap.attr.ipPhone
Configuring IP
Groups.
- 311 -
Mediant 800 Gateway & E-SBC | User's Manual
Rule 2
LDAP
'mobile=+' + param.call.src.user
ipPhone
ldap.attr.ipPhone exists
presence.src
Add
ldap.attr.ipPhone
Configuring Tel-to-IP Routing