AudioCodes Mediant 800 User Manual page 376

CHAPTER 18 Core Entities
Table 18-3: Media Realm Extension Table Parameter Descriptions
Parameter
'Index'
[MediaRealmExtension_
ExtensionIndex]
'IPv4 Interface Name'
[MediaRealmExtension_
IPv4IF]
'IPv6 Interface Name'
[MediaRealmExtension_
IPv6IF]
'Port Range Start'
[MediaRealmExtension_
PortRangeStart]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Assigns an IPv4 network interface (configured in the IP Interfaces
table) to the Media Realm Extension.
By default, no value is defined.
To configure IP network interfaces, see
Interfaces.
Note:
■ The parameter is mandatory.
■ You must configure the Media Realm Extension with an IP
network interface that has the same IP version(s) as the Media
Realm to which the Media Realm Extension is associated. If
the associated Media Realm is assigned both an IPv4 and
IPv6 network interface, you also need to assign the Media
Realm Extension with both an IPv4 and IPv6 network
interface. For example, if the associated Media Realm is
assigned only an IPv4 network interface, you also need to
assign the Media Realm Extension with an IPv4 network
interface.
Assigns an IPv6 network interface (configured in the IP Interfaces
table) to the Media Realm Extension.
By default, no value is defined.
Note:
■ The parameter is mandatory.
■ You must configure the Media Realm Extension with an IP
network interface that has the same IP version(s) as the Media
Realm to which the Media Realm Extension is associated. If
the associated Media Realm is assigned both an IPv4 and
IPv6 network interface, you also need to assign the Media
Realm Extension with both an IPv4 and IPv6 network
interface. For example, if the associated Media Realm is
assigned an IPv6 network interface, you also need to assign
the Media Realm Extension with an IPv6 network interface.
Defines the first (lower) port in the range of media UDP ports for
the Media Realm Extension.
By default, no value is defined.
Notes:
■ You must either configure all your Media Realms with port
ranges or all without; not some with and some without.
■ The available UDP port range is according to the
BaseUDPport parameter. For more information, see
Configuring RTP Base UDP
- 336 -
Mediant 800 Gateway & E-SBC | User's Manual
Description
Configuring IP Network
Port.