CHAPTER 16 Services
■
The group management attribute is configured by the 'Management Attribute' parameter in the
LDAP Servers table:
■
The management group and its corresponding access level is configured in the Management
LDAP Groups table (see
Enabling LDAP Searches for Numbers with Characters
Typically, the device performs LDAP searches in the AD for complete numbers where the digits are
adjacent to one another (e.g., 5038234567). However, if the number is defined in the AD with
characters (such as spaces, hyphens and periods) separating the digits (e.g., 503-823 4567), the
LDAP query returns a failed result.
Configuring Access Level per Management Groups
- 244 -
Mediant 800 Gateway & E-SBC | User's Manual
Attributes):