AudioCodes Mediant 800 User Manual page 290

CHAPTER 16 Services
Table 16-14:AD-Based Tel-to-IP Routing Rule Configuration Examples
Index
1
2
3
4
5
6
7
The table below shows an example for configuring AD-based SBC routing rules in the IP-to-IP
Routing Table:
Table 16-15:AD-Based SBC IP-to-IP Routing Rule Configuration Examples
Index Destination Username Pattern
1 PRIVATE:
2 PBX:
3 OCS:
4 MOBILE:
5 LDAP_ERR
6 *
7 *
The configured routing rule example is explained below:
■ Rule 1: Sends call to private telephone line (at 10.33.45.60) upon successful AD query result
for the private attribute.
■ Rule 2: Sends call to IP PBX (at 10.33.45.65) upon successful AD query result for the PBX
attribute.
■ Rule 3: Sends call to Skype for Business client (i.e., Mediation Server at 10.33.45.68) upon
successful AD query result for the Skype for Business attribute.
■ Rule 4: Sends call to user's mobile phone number (to PSTN through the device's IP address at
10.33.45.100) upon successful AD query result for the Mobile attribute.
■ Rule 5: Sends call to IP address of device (10.33.45.80) if AD query failure (e.g., no response
from LDAP server or attribute not found).
■ Rule 6: Sends query for original destination number of received call to the LDAP server.
■ Rule 7: Alternative routing rule that sends the call of original dialed number to IP destination
10.33.45.72. This rule is applied in any of the following cases
● LDAP functionality is disabled.
Destination Phone Prefix
PRIVATE:
PBX:
OCS:
MOBILE:
LDAP_ERR
*
*
Mediant 800 Gateway & E-SBC | User's Manual
Destination IP Address
Destination Type
Dest Address
Dest Address
Dest Address
Dest Address
Dest Address
LDAP
Dest Address
- 250 -
10.33.45.60
10.33.45.65
10.33.45.68
10.33.45.100
10.33.45.80
LDAP
10.33.45.72
Destination Address
10.33.45.60
10.33.45.65
10.33.45.68
10.33.45.100
10.33.45.80
-
10.33.45.72