Configuring Format Of Siprec Metadata; Configuring Sip User Part For Srs; Interworking Sip-Based Media Recording With Third-Party Vendors - AudioCodes Mediant 800 User Manual

CHAPTER 16 Services
3. In the SIP Recording Rules table, configure a SIP Recording rule as desired and assign it the
Message Condition rule that you configured in the previous step:
● 'Recorded IP Group': ITSP
● 'Condition': CallRec

Configuring Format of SIPRec Metadata

You can configure the format of the XML-based recording metadata that the device generates and
includes in the SIP messages that it sends to the recording server (SRS). It is important that the
device generates the metadata in a format that is acceptable by the SRS.
The device supports the following formats:
■ RFC 7865 - the device generates the recording metadata in a format that is according to RFC
7865, whereby all IDs (e.g., participant ID) are in Base64 format. This metadata format also
includes additional XML tags with association information (e.g., "<participantsessionassoc>").
■ Legacy (default) - The device generates the recording metadata in a "legacy" format, whereby
the user part of the participant URI (source or destination) is used as the ID.
➢
To configure the format of the metadata:
1. Open the SIP Recording Settings page (Setup menu > Signaling & Media tab > SIP
Recording folder > SIP Recording Settings).
2. From the 'SIP Recording Metadata Format' drop-down list, select the desired format.
3. Click Apply.

Configuring SIP User Part for SRS

You can configure the SIP user part of the Request-URI for the recording server (SRS). The device
inserts this user part in the SIP To header of the INVITE message sent to the SRS.
➢
To configure the SIP user part for SRS:
1. Open the SIP Recording Settings page (Setup menu > Signaling & Media tab > SIP
Recording folder > SIP Recording Settings).
2. In the 'Recording Server (SRS) Destination Username' field, enter a user part value (string of
up to 50 characters).
3. Click Apply.
Interworking SIP-based Media Recording with Third-Party
Vendors
The device can interwork the SIP-based Media Recording feature with third-party vendors, as
described in the following subsections.
Figure 16-1: Configuring SIPRec Metadata Format
Mediant 800 Gateway & E-SBC | User's Manual
- 212 -