AudioCodes Mediant 800 User Manual page 321

CHAPTER 16 Services
Parameter
'Listening Interface'
listen-interface
[TcpUdpServer_
ListeningInterface]
'TCP Listening Port'
tcp-port
[TcpUdpServer_
TCPListeningPort]
'UDP Listening Port'
udp-port
[TcpUdpServer_
UDPListeningPort]
'Listen Side SSL'
listen-use-ssl
[TcpUdpServer_
ListenUseSSL]
'Listen TLS Context'
listen-tls-context
[TcpUdpServer_
ListenTLSContext]
Upstream Parameters
'Upstream Group'
upstream-group
[TcpUdpServer_
UpstreamGroup]
'Outbound Interface'
outbound-interface
[TcpUdpServer_
OutboundInterface]
Mediant 800 Gateway & E-SBC | User's Manual
Assigns a local IP network interface for the listening (source)
interface for communication with the TCP-UDP proxy server. To
configure IP Interfaces, see
on page 97.
By default, no value is defined.
Note:
■ The parameter is mandatory.
■ The NGINX directive for this parameter is "listen ip".
Defines the TCP port of the listening interface.
Note:
■ You must configure a TCP and/or UDP port.
■ The NGINX directive for this parameter is "listen ip:port".
Defines the TCP port of the listening interface.
Note:
■ You must configure a TCP and/or UDP port.
■ The NGINX directive for this parameter is "listen ip:port udp".
Enables SSL on the listening side (i.e., listening to incoming
connection requests).
■ [0] Disable (default)
■ [1] Enable
Note: The NGINX directive for this parameter is "listen ip:port
ssl".
Assigns a TLS Context (TLS certificate) for the listening side.
This is required if you have configured the 'Listen Side SSL'
parameter to Enable (see above). To configure TLS Contexts,
see Configuring TLS Certificate Contexts
Note: The NGINX directives for this parameter is "ssl_
certificate", "ssl_certificate_key", "ssl_ciphers", "ssl_
protocols", and "ssl_password_file".
Assigns a group of servers (Upstream Group) to which to
forward connection requests. To configure Upstream Groups,
see Configuring Upstream Groups
Note:
■ Only Upstream Groups with TCP/UDP interfaces can be
assigned.
■ The NGINX directive for this parameter is "proxy_pass
upstream".
Assigns a local, IP network interface for communicating with the
Upstream Group. To configure IP network interfaces, see
Configuring IP Network Interfaces
By default, no value is defined.
- 281 -
Description
Configuring IP Network Interfaces
on page 126.
on the next page.
on page 97.