AudioCodes Mediant 800 User Manual page 445

CHAPTER 19 Coders and Profiles
➢
To delete a Coder Group:
1. From the 'Coder Group Name' drop-down list, select the Coder Group that you want to delete.
2. Click Delete Group.
Table 19-1: Coder Groups Table Parameter Descriptions
Parameter
'Coder Group Name'
[AudioCodersGroups_Index]
[AudioCodersGroups_Name]
[AudioCoders_
AudioCodersIndex]
'Coder Name'
name
[AudioCoders_Name]
'Packetization Time'
p-time
[AudioCoders_pTime]
'Rate'
rate
[AudioCoders_rate]
'Payload Type'
payload-type
[AudioCoders_PayloadType]
'Silence Suppression'
silence-suppression
[AudioCoders_Sce]
'Coder Specific'
coder-specific
[AudioCoders_CoderSpecific]
Mediant 800 Gateway & E-SBC | User's Manual
Description
Defines the name and index for the Coder Group.
Note: The Coder Group index/name cannot be configured.
Index row of the coder per Coder Group
Note: The parameter is applicable only to the ini file.
Defines the coder type. For coder names, see
Audio Coders.
Note: Each coder type (e.g., G.729) can be configured only
once in the table.
Defines the packetization time (in msec) for the coder. The
packetization time determines how many coder payloads
are combined into a single RTP packet. For ptime, see
Supported Audio Coders.
Defines the bit rate (in kbps) for the coder. For rates, see
Supported Audio Coders.
Defines the payload type if the payload type (i.e., format of
the RTP payload) for the coder is dynamic. For payload
types, see Supported Audio
Enables silence suppression for the coder.
■ [0] Disable (Default)
■ [1] Enable
■ [2] Enable w/o Adaptation
Note:
■ Option [2] Enable w/o Adaptation is applicable only to
G.729.
■ If you disable silence suppression for G.729, the device
includes 'annexb=no' in the SDP of the relevant SIP
messages. If you enable silence suppression,
'annexb=yes' is included. For the Gateway application,
an exception is when the remote gateway is Cisco
equipment (IsCiscoSCEMode).
Defines additional settings specific to the coder.
Currently, the parameter is applicable only to the AMR
coder and is used to configure the payload format type.
■ [0] 0 = Bandwidth Efficient
■ [1] 1 = Octet Aligned (default)
- 405 -
Supported
Coders.