Configuring Http Directives - AudioCodes Mediant 800 User Manual

CHAPTER 16 Services
➢
To configure an HTTP Directive Set:
1. Open the HTTP Directive Sets table (Setup menu > IP Network tab > HTTP Proxy folder >
HTTP Directive Sets).
2. Click New; the following dialog box appears:
3. Configure an HTTP Directive Set according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
5. Configure directives for the HTTP Directive Set (see
Table 16-26:HTTP Directive Sets Table Parameter Descriptions
Parameter
'Index'
[HTTPDirectiveSets_
Index]
'Set Name'
set-name
[HTTPDirectiveSets_
SetName]
'Description'
set-description
[HTTPDirectiveSets_
Description]

Configuring HTTP Directives

The HTTP Directives table lets you configure up to 500 HTTP Directives. The table is a "child" of
the HTTP Directive Sets table (see
The following procedure describes how to configure HTTP Directives through the Web interface.
You can also configure it through ini file [HTTPDirectives] or CLI (configure network >
http-proxy > directives).
➢
To configure an HTTP Directive:
1. Open the HTTP Directive Sets table (Setup menu > IP Network tab > HTTP Proxy folder >
HTTP Directive Sets).
2. In the table, select the required HTTP Directive Set index row, and then click the HTTP
Directives link located below the table; the HTTP Directives table appears.
3. Click New; the following dialog box appears:
Defines an index number for the new table row.
Note:
■ Each row must be configured with a unique index.
■ The parameter is mandatory.
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 40 characters. By default, no value
is defined.
Note: The parameter value cannot contain a forward slash (/).
Defines a brief description for the HTTP Directive Set.
The valid value is a string of up to 100 characters. By default, no value
is defined.
Configuring HTTP Directive Sets
- 287 -
Mediant 800 Gateway & E-SBC | User's Manual
Configuring HTTP Directives
Description
on the previous page).
below).