Vanderbilt SPC42 Series Installation & Configuration Manual page 96

Keypad user interface
12
SPCK620/623
96
Vanderbilt
1 LED status indicators
2 LCD display
3 Soft function keys
4 Enter key
5 Back menu key
6 Proximity device receiver area
7 Alphanumeric keys
8 Multi-functional navigation key
Installation & Configuration Manual
The LED status indicators provide information on
the current status of the system as detailed in the
table below.
The keypad display shows all alert and warning
messages and provides a visual interface for
programming the system (engineer programming
only). (See section on Display Message
Prioritization) The display can be configured under
which conditions the backlight comes on.
Context sensitive keys to navigate through
menus/programming.
Confirm display or input.
Go back in the menu

Reset buzzers, siren and alarms in the memory.
Only SPCK 623: If the keypad has been fitted with
a proximity device receiver, users should present
the Portable ACE Fob to within 1 cm of this area.
Alphanumeric keypad allow for both text and
numeric data entry during programming. Alphabetic
characters are selected by applying the appropriate
number of key presses. To switch between upper
and lower case characters, press the hash (#) key.
To enter a numeric digit, hold down the appropriate
key for 2 seconds.
Navigation through menus and to scroll through
alert messages. (See Display Message
A6V10276959
01.05.2016