Vanderbilt SPC42 Series Installation & Configuration Manual page 280

Engineer programming via the browser
17
Configuring Communications
17.10.2.2.1.1
280
Vanderbilt
ATP Category
Advanced
Advanced ATP Settings
Configure Advanced ATP Settings
WARNING
It is not recommended to change Advanced ATP Settings. Changes must only be
made by expert users.
1. Click the Advanced ATP Settings button.
1. Configure the fields described in the table below.
2. Click Save.
ATP Connections
Active ATP Connection
Installation & Configuration Manual
Dial Up Internet: Modem 1

Dial Up Internet: Modem 2

Select the category to apply to this ATP. For
information on ATP Categories, see ATP
Category Timings [➙ 363].
It is not recommended to change advanced
settings. Changes must only be made by expert
users.
Select the ATP connection type when the
ATP is operating as the primary
communication path.
Permanent: Stay Connected

Temporary: Hangup 1second

Temporary: Hangup 20 second

Temporary: Hangup 80 second

Temporary: Hangup 3 minutes

Temporary: Hangup 10 minutes

Temporary: Hangup 30 minutes

A6V10276959
01.05.2016