Vanderbilt SPC42 Series Installation & Configuration Manual page 33

Vanderbilt
Event memory
Number of on-board zones
Max. number of hardwired
zones
Max. number of wireless zones 120 (take away wired zones)
Max. number of Intrunet
wireless detectors per wireless
receiver (recommended)
EOL resistor
Relay Outputs
Electronic Outputs
Firmware
Door capacity
Number of card reader
Radio module
Verification
Video
Audio
Field bus 1)
Number of field devices 2)
Connectable field devices
Interfaces
Tamper contact
Power supply
Mains voltage
Installation & Configuration Manual
10,000 intrusion events, 10,000 access events
SPC5320\5330 — 8

SPC5350 — 16

128
20
Dual 4k7 (default), other resistor combinations
configurable
SPC5320\5330 — 1 strobe (30 VDC/1A resistive

switching current)
SPC5350 — 4 (single-pole changeover, 30VDC/

maximum 1A resistive switching current)
SPC5320\5330 — 5 outputs:

– 2 internal/external bells
– 3 programmable. Maximum 400 mA resistive
switching current per output, supplied by auxiliary
output.
SPC5350 — 8 outputs. Maximum 400mA resistive

switching current per output
– 5 standard power outputs
– 3 supervised outputs
V3.x
Max. 16 entry doors or 8 entry/exit doors
Max. 16
Optional (SPCW110)
16 verification zones with max. 4 IP-cameras and 16
audio devices.
Up to 16 pre / 16 post event images (by JPEG resolution
320 x 240, max. 1 frame / sec.)
Up to 60 sec. pre / 60 sec. post audio recording
X-BUS on RS-485 (307 kb/s)
Max. 48 (16 keypads, 8 door-expanders, 16 input/output
expanders)
Keypads: SPCK42x, SPCK62x

Door expanders: SPCA210, SPCP43x

Expanders with I/O: SPCE65x, SPCE45x, SPCP33x,

SPCP35x, SPCE110, SPCE120, SPCV32x
2 X-BUS (2 spurs or 1 loop),

2 RS232

1 USB (PC connection),

1 SPC Fast Programmer,

SPC53xx: Additionally 1 Ethernet (RJ45)

SPC5320/5330: Front spring tamper, 2 auxiliary

tamper contact inputs
SPC5350: Front/back tamper switch

Type A (per EN50131-1)
230 VAC, + 10%/ -15%, 50 Hz
Technical Data
4
SPC5000
33
A6V10276959
01.05.2016