Vanderbilt SPC42 Series Installation & Configuration Manual page 52

Mounting system equipment
6
Mounting a G5 housing
52
Vanderbilt
1 Wall
2 Back tamper screw
3 Back wall of housing
Tamper switch – displaced
1 Wall
2 Back tamper screw
3 Back wall of housing
If the housing is removed from the wall or displaced, the tamper bracket screw is
no longer secure against the wall, causing the bracket to pivot. This in turn causes
the tamper switch to swivel away from the lid and opens the switch contact.
WARNING
If the tamper bracket screw is not secure against the wall, then tamper protection
is compromised.
Installation & Configuration Manual
4 Housing lid
5 Tamper switch contact closed
4 Housing lid
5 Tamper switch contact open
A6V10276959
01.05.2016