Vanderbilt SPC42 Series Installation & Configuration Manual page 266

Engineer programming via the browser
17
Configuring Communications
17.10.1.3.5
266
Vanderbilt
****.XA1.ON
**** XA1.OFF
****.XA1.OFF
**** LOG
****.LOG
**** ENG.ON ENG.ON
****.ENG.ON
**** ENG.OFF ENG.OFF
****.ENG.OFF
**** MANA.ON
****.MANA.ON
**** MAN.OFF
****.MAN.OFF
**** O5.ON
****.05.ON
**** O5.OFF
****.05.OFF
For SMS recognition, output identification uses the format ONNN, where O stands
for output, and NNN are the numeric placeholders, of which not all are necessary.
Example: O5 for Output 5.
For SMS recognition, X-10 device uses the format: XYNN, where X stands for X-
10; Y stands for the alphabetic identity and NN are the available numeric
placeholders. Example: XA1.
PSTN modem
1. Select Communications > Communications > Modems > Configure.
2. Configure the fields as described in the table below.
Installation & Configuration Manual
triggered on.
Where X10 device is
identified as "A1", it is
triggered off.
Up to 10 recent events
displayed
Enable Engineer access
Disable Engineer access
Enable Manufacturer access
Disable Manufacturer access
Where output is identified as
"O5", it is triggered on
Where output is identified as
"O5", it is triggered off
Status of "A1"
Recent events
Engineer status
Engineer status
Manufacturer status
Manufacturer status
Status of "O5"
Status of "O5"
A6V10276959
01.05.2016