Vanderbilt SPC42 Series Installation & Configuration Manual page 125

Vanderbilt
Name
VISUAL INDICATIONS
(Flexible Mode only)
LED ALWAYS
AUDIBLE IND.
(Flexible Mode only)
DEACTIVATION
(Flexible Mode only)
MODE
INPUT
Installation & Configuration Manual
Engineer programming via the keypad
Description
Unset

Partset A

Partset B

Fullset

Toggle Unset/Fullset

Toggle Unset/Partset A

Toggle Unset/Partset B

All Okay

Setting Authorisation

Enables you to assign specific behaviour to each LED on the
indicator module. Each of the LEDs has the following options:
FUNCTION — the following options are available:

– KEYSWITCH — select a keyswitch and the position
of the key.
– DISABLED — select to disable the LED.
– SYSTEM — select the alarm type which triggers the
LED.
– AREA — select the area which triggers the LED.
– ZONE — select the zone which triggers the LED
– DOOR — select the door and the door option which
triggers the LED.
ON – COLOR — specify the activation colour

ON – FLASH — specify the behaviour of the LED in

active state. Available options are:
– Permanent — always on.
– Flash Fast\Medium\Slow — varying speed of the
flashing.
OFF – COLOR — specify the deactivation colour.

OFF – FLASH — specify the behaviour of the LED in the

inactive state. Available options are:
– Permanent — always on.
– Flash Fast\Medium\Slow — varying speed of the
flashing.
Enable if LED indicators remain active when keys are
deactivated.
Select the audible indicators for alarms, entry/exit, and
keypresses,
Choose one, or more, of the following deactivation options:
Calendar – select a calendar from the available options.

Keyswitch – select a keyswitch from the available

options.
Keypad - select a keypad from the available options.

Card Reader – enable or disable deactivation using a

keypad.
Select Linked or Flexible. Linked mode reduces the number
of options available in the Expander Edit menu.
Select the zone
16
X-BUS
125
A6V10276959
01.05.2016